Tips – Bagotte Official

Free Shipping On All Orders!

Tips

RSS

What is the best robot vacuum cleaner for pet hair? 0

What is the Best Robot Vacuum Cleaner for Pet Hair?

Posted on April 16

How to let your pets eat the best food, maybe you are very good at it. But how to clean up messy pet hair? As a pet owner, do you know what to do? There will be pet hairs in every corner. Do you want to find them one by one? Obviously this is a very exhausting way.

“ Adults have adult troubles. How can I have the time and energy to deal with pet hair? ”

“ Although the world is wonderful, life covered by a pile of pet hair. ”

“ Always let me feed Bobby, but didn't tell me how to clean up his dog's fur. ”

Well, my dear sir and ladies, calm down and listen to me now, okay?

This world is not as bad as you think. Better late than never.

You deserve to have an excellent and cost-effective robot vacuum cleaner to clean up your pet hair now. But there are many brands of robot vacuum cleaner, which one should you choose?

The Bagotte BG800 Robot Vacuum Cleaner is the best choice for your pets. Because It can satisfy all your wishes for the robot vacuum cleaner. Its strongest 2200Pa suction power which equipped with Auto-Boost technology for carpet can help you instantly absorb your pet hair. The Real-Time Room Mapping Function can allows you to monitor the working conditions of the robot vacuum cleaner without being restricted by time and space. Besides, the Bagotte BG800 Robot Vacuum Cleaner can be controlled with APP & Voice.

At the same time, you don’t have to worry about missing some corners, because you can draw the route freely.

Features:

●Dual Navigation System

Equipped with the latest dual gyroscope and optical tracking navigation technology, cleaning in a straight-line instead of a random pattern

●2200Pa 3-In-1 absorption

sweeping, mopping, vacuuming, redesigned using automatic acceleration technology

Remote and voice controls: It can be controlled remotely , simply program scheduling, cleaning paths, real-time monitoring and unit customization could through the Bagotte App, what’s more, you can use voice control like Alexa or Google Assistant

●Elegant design and smart sensors

ultra-thin 2.7 inches construction, moving from hard floors to carpets easily, providing seamless navigation under and around furniture, smart sensors can avoid obstacles or falls, practical magnetic tape ensures the robot vacuum cleaner only cleans where you want

●Effective cleaning

floors of over 500 square feet can be efficiently cleaned in 40-50 minutes, and the unit returns to the charging base automatically when the job is done

●Equipped with advanced gyroscope

in the process of machine operation, it can accurately detect the running direction and turning angle of the machine, timely detect the existing running condition of the machine, and provide it to the main control software to ensure the accurate implementation of the software algorithm. Coordinate positioning, running direction and turning angle in the cleaning process can guide the safe driving until the target position.

●Optical flow

to solve the problem of traditional sweeping robot trajectory chaos

●Warranty

guaranteed for 1-year

To be honest, if I have more budget, I will not buy more expensive ones. Because for me, the core consumer value is the most important. It's like buying a $500 wired rechargeable electric toothbrush and a $700 Bluetooth wireless electric toothbrush. Their core functions are actually the same, only the charging method is changed. But this will not affect the core effect of brushing. After all, it’s more important to save more money to do more valuable things, right? If you agree with me, I recommend you to use this robot vacuum cleaner.

-If you have any questions or suggestions, you could join our Bagotte-Forum to communicate with others!

-If you are interested in our blog, you can register E-mail on the blog page to get our blog push information at the first time!

  • Author
  • Recent Posts

Sakurada Fika

at  Bagotte

The youngest household product expert from Japan, has been engaged in the research and development of household cleaning products for 7 years. She has a very unique understanding of the functional design of household products.

Latest posts by Sakurada Fika (see all)

  • Shopify API

Promise Me to Learn This Magic Now 0

Promise Me to Learn This Magic Now

Posted on March

Why do your robot vacuum cleaner  run out  of power after working for a while? 

Why is my Robot Vacuum  Cleaner not turning on or charging?

I know you need it badly, so I wrote it out overnight...

1 The fan does not turn

Fault description

Press the start button to start, the fan and brush of the machine will rotate for one second and then stop, and the wheels will keep rotating. The fan and brush will restart three times, and the machine will pause after three restarts, and the buzzer will sound an alarm.

Repair method

● Check if the fan is deformed, if there is any abnormal noise from the wind blade, if so, please replace the fan module.

● Unplug the fan cable, and then press the start button. If there is no alarm, you need to replace the fan module.

● Unplug the fan cable, and then press the start button. If the machine still has an alarm and no abnormality is detected, the motherboard needs to be replaced.

2 Abnormal sound of the main tooth box

Fault description-1

Press the start button to start, the fan and brush of the machine will turn for a few seconds and then stop, the wheels will keep rotating, and the fan and brush will restart three times. After three restarts, the machine will pause and the buzzer will sound an alarm.

Repair method-1

● Clean up the entangled debris on the main brush and side brush.

● Unplug the cable of the brushing box, and then press the start button. If there is no alarm, you need to replace the main tooth box.

● Unplug the cable of the brushing box, and then press the start button, if the machine is still alarming, you need to replace the motherboard.

Fault description-2

Press the start button to start, the machine turns backwards, then pauses, the alarm light flashes, and the buzzer sounds an alarm.

Repair method-2

● Clean the ground inspection sensor. The sensitivity of the ground inspection sensor is too dirty. Change the ground with a lighter color to see the effect.

● Check whether the cable of the sensor is loose or falling off.

● The ground sensor is damaged and needs to be replaced.

3 Pause while running

Fault description

Press the start button to start, the machine will pause after running for a few seconds, and the fan, brushes and wheels will not rotate. You have to restart three times. After three restarts, the machine will pause, and the buzzer will sound.

Repair method

● If it is a rough carpet floor, the resistance of the machine forward is too great, put the machine on the floor environment and try it.

● Unplug the left and right wheels and start the machine to check if there is any such bad phenomenon. If there is, it means that there is a problem with the motherboard and the motherboard needs to be replaced.

4 Does not boot

Fault description

It can't be turned on by pressing the power button.

Repair method

● The machine has been left for too long and the battery is dead, so you need to use a charging stand or adapter to charge it.

● Please check whether the battery cable and the connection cable of the face shell are loose or fall off.

● If the machine is switched on and off frequently, please check whether the key switch is damaged.

● When none of the above reasons are found, the motherboard needs to be replaced.

5 No shutdown

Fault description

After turning on the machine, press the power button and it cannot be turned off.

Repair method

● If the machine is switched on and off frequently, please check whether the key switch is damaged.

● Please check whether the connection cable of the face shell is loose or falling off

● If an abnormality is not detected, the main board needs to be replaced.

6 The brush does not turn

Fault description

The main brush rotates, but the side brush does not rotate;

the main brush and the side brush do not rotate

Repair method

● Check whether the main brush is rotating, if the main brush is rotating, then check whether there is any foreign matter entangled in the side brush

● If neither the main brush nor the side brush can be rotated, loosen the screws of the main tooth box a bit and see if it starts to rotate. If it still cannot be rotated, only replace the main tooth box.

7 The fan/brush keeps rotating regardless of whether it is turned on or off

Fault description

 The fan/brush keeps running after shutting down

Repair method

● Replace the motherboard

8 The left/right wheel does not turn

Fault description

After the machine is started, the left / right wheels do not rotate, and the main brush / fan works normally.

Repair method

● First check whether there is any foreign matter stuck on the left and right wheels and whether the socket is loose.

● If there is only one wheel that does not turn, switch the left and right wheel sockets to start the machine and check whether the machine still does not turn on the previous wheel. If it is, it means that the wheel that does not turn is broken and the wheel needs to be replaced. If not, the motherboard needs to be replaced.

● The machine starts to move diagonally to one side, stops after walking or hits a wall and then pauses, indicating that the motherboard is broken and the motherboard needs to be replaced

9 The remote control is not sensitive, the remote control does not work/does not find a charging stand automatically

Fault description

The buttons on the remote control can sometimes be remotely controlled and sometimes cannot be remotely controlled.

Repair method

● Check if the voltage of the remote control battery is too low.

● The machine cannot be placed in front of the charging dock and virtual wall that has been turned on (the remote control is not possible within 3M from the charging dock and the virtual wall). Please unplug the charging dock and turn off the virtual wall before performing remote control.

● Open the charging base and let the machine switch to find the charging base mode and run, and see if the machine can automatically turn when looking for the charging base. If it can turn, it means the problem is with the remote control. If it can't turn, it means the receiver of the machine has a problem. Replace it. 

10 The machine does not charge

Fault description

The buttons on the remote control do not work after turning on; the machine does not circle when looking for the charging station

Repair method

● When the remote control does not work, if you find the charging cradle normally, it means that there is a problem with the remote control itself. Check whether the battery is charged and the battery voltage is normal. A dead battery needs to be replaced with a battery of the same specification. If the machine does not turn in a circle when looking for the charging station, it means that the receiving head of the button board/display board of the machine is bad, and the button board or receiving head needs to be replaced.

● The machine is controlled by remote control only after it is turned on manually, and cannot be controlled by remote control when it is turned off manually

11 The machine cannot be charged after being left for too long

Fault description

When the machine is left for more than one month, it cannot be turned on and the main unit is charged. After a while, the green light will go out, indicating that it is fully charged. After working for a while, there will be no electricity.

Maintenance method

● Use the adapter to directly charge the host. After the green light is off, it still needs to be charged for one hour. At this time, the small battery is used to activate the battery. After one hour, the machine stops charging for one minute, and the host is charged again. It can be charged normally. If it still does not work, please replenish it for another hour and activate the battery again. Repeat this three times to fully activate the battery.

12 The machine is in trouble/Does not turn on after charging

Fault description

The machine is jammed by special objects on the ground

Repair method

● The machine is entangled by wires, wires, etc. scattered on the ground.

● The machine is entangled by drooping curtains or the fringe of the carpet.

● There are too many obstacles in front of the machine, and the machine will alarm and pause if it cannot get out within a certain period of time.

13 The buttons are not working

Fault description

The buttons on the keypad sometimes work, and sometimes they don’t.

Repair method

● Replace the key board or replace the keys of the same specification

14 Retreat continuously and turn left

Fault description

After the machine is started, it moves backwards, then turns left, and then moves backwards and turns left again, looping all the time.

Repair method

● Check that there is a wireless material stuck into the sensor, if any, disconnect the cable and re install it.

● Check whether the air duct is broken or falling off.

● Change to a right wheel and run the machine to check if there is a continuous back-and-left turn. If you continue to back and turn left, replace the motherboard.

15  Retreat continuously and turn right

Fault description

After the machine is started, it moves backwards, then turns right, and then moves backwards and turns right again, looping all the time.

Repair method

● Check that there is a wireless material stuck into the sensor, if any, disconnect the cable and re install it.

● Check whether the air duct is broken or falling off.

● Change to a right wheel and run the machine to check if there is a continuous back-and-right turn. If you continue to back and turn right, replace the motherboard.

16 Back left and right, red light alarm

Fault description-1

The machine will pause for about 1 second after starting up and alarm with a red light

Repair method-1

● Check all the ground sensors for loose sockets.

● Inspect the sensor wire with your hand gently to see if there is any fall off. If there is none, you need to replace the motherboard.

Fault description-2

The machine pauses and alarms with a red light after going back and forth for a few seconds after starting up

Repair method-2

● Check whether there is something covering the lens of the ground inspection sensor.

● Replace a ground running machine with a white color, and observe whether there is a red light alarm when the left and right retreat.

● Check whether the sockets of all the ground sensors are loose or fall off, and gently move the ground sensor wires with your hands to check whether there is any fall off. If there are none, you need to replace the motherboard.

17 Red light alarm

Fault description

alarm immediately after start-up

Repair method

● When starting, the red light will alarm if the wheel brush has not been rotated. First charge the adapter for a few seconds to observe whether the machine can be charged normally, then unplug the DC charging cable and start the machine. If the machine still activates the alarm You need to replace a DC charging stand.

18 The cleaning effect is not good, the suction power becomes smaller

Fault description

The dust is not clean when the machine sweeps the floor

Maintenance method

● Check whether the dust box, dust inlet, dust box cover is too dirty or blocked, and whether the side sweep is normal. Whether the battery is dead. Replace sponge

19 The machine suddenly stops working during operation

Fault description

The machine suddenly stops/shut down when it is running

Repair method

● Check whether the power of the machine is exhausted, and it will automatically shut down when the power is exhausted. At this time, manual charging is required.

● Check whether the machine is working in fixed-point mode. In fixed-point mode, the machine will pause for about 2 minutes.

20 Increased noise

Fault description

The sound of the running machine suddenly becomes louder

Repair method

● If the running machine suddenly becomes louder, observe whether the machine enters the clockwise fixed-point cleaning mode. If it enters the fixed-point mode, it is a normal phenomenon and will automatically recover after a period of time.

● If the machine has a sharp sound in the automatic cleaning mode, please check whether the dust box is installed, and check whether the brush and dust box are too dirty.

● If there is a serious abnormal noise, turn the machine into automatic charging mode and run the machine to observe whether there is any abnormal noise. If there is any abnormal noise, it means that it is the abnormal noise of the main brush box. Check whether there is any foreign matter on the brush wheel. If there is no abnormal noise, it means that the fan is abnormal. Check whether the fan is stuck with foreign objects, otherwise the fan needs to be replaced.

21 The fall prevention of the machine is ineffective or not working

Fault description

The running machine occasionally falls off the steps or pauses at the edge of the steps and alarms with a red light

Repair method

● First of all, make sure that the height of the step must be greater than 8CM.

● Please check whether the sensor at the bottom of the machine is too dirty or obstructed. The smooth or highly reflective parts of the machine may cause deterioration of the anti-drop function.

● Check whether the machine is working under strong sunlight. Please do not stack fragile objects under the table or steps cleaned by the machine to prevent the machine from falling under the influence of the environment.

-If you have any questions or suggestions, you could join our Bagotte-Forum to communicate with others!

-If you are interested in our blog, you can register E-mail on the blog page to get our blog push information at the first time!

  • Author
  • Recent Posts

Sakurada Fika

at  Bagotte

The youngest household product expert from Japan, has been engaged in the research and development of household cleaning products for 7 years. She has a very unique understanding of the functional design of household products.

Latest posts by Sakurada Fika (see all)

  • Shopify API

Why the BS900 Cordless Vacuum Cleaner is a good choice for you? 0

Why the BS900 Cordless Vacuum Cleaner is a                                        Good Choice for You?

Posted on 

Nowadays, the need to keep a clean home and the advancement of technology has made cleaning products such as cordless vacuum cleaners are more and more required in people's daily life. Today we will review the BS900 Cordless Vacuum Cleaner on its features and advantages in relation to the BS800 Cordless Vacuum Cleaner, and also will compare with other similar cordless vacuum cleaner.

A brief description

BS900 Cordless Vacuum Cleaner, which is an upgrade to BS800, equipped with 25KPA power suction, up to 55 minutes of running time, with longer battery and charging time of 2-3 hours, and with a hard floor brush and carpet brush included for more efficient cleaning of your home.

Why is it better?

- Cost effective

If your current cordless vacuum is not strong enough to suck up the food debris or dust that have been spread on the floor, don't worry, BS900 has a 400W motor, with a rotation speed up to 1500 rpm, and an ultra-strong suction power up to 25k, which powerful enough to keep your house very clean. Sounds great right?

- Maximizing cleaning time

I know, everybody has many occupations and our time is very limited, so as long as we can minimize the time we dedicate to cleaning, we will have more time to complete other pending tasks. For that, BS900 Cordless Vacuum Cleaner has excellent wireless runtime distributed as follows:

● 55 minutes at 7KPA ,

● 20 minutes at 13KPA ,

● 8 minutes at a maximum of 25KPA

In this way, if you have enough time, you can choose a 7KPA suction cleaning, if your time is short choose 13KPA, and if you are in a hurry 25KPA is the ideal.

- Faster charging time

As mentioned, the time we spend doing something is very important, and it is tiring to be waiting a long time until our product is charged and finally can use it again. Therefore, the BS900 Cordless Vacuum Cleaner uses a battery with a super fast charging function that allows a full charge in only 2-3 hours, allowing us to save time.

- Clean your floor and carpet at your comfort

Because cleaning on different types of floors is often complicated, BS900 Cordless Vacuum Cleaner includes two cleaning brushes, one cleaning brush for hard floors and one carpet cleaning brush. In addition, it brings two additional cleaning devices that you can use according to your needs.

- Collect much more dust

The dust container is 0.6 large and removable, enough to collect the dust from the floor and carpets. Moreover, it has a button that allows you to open the lid of the container and easily empty the dust collected into the wastebasket.

- The dust cannot take refuge in the darkness more

Like its predecessor, it uses LED light in front of the vacuum for night vacuuming and clean in dark and hidden places, where debris and dust take refuge and go unnoticed.

- Stylish decoration in your home

It is designed with a black-purple cover and has a bracket that allows you to fix it on the wall, complementing your home with an elegant and attractive decoration.

What's the difference?

Now we review the main improvements of the BS900 Cordless Vacuum Cleaner over the BS800 Cordless Vacuum Cleaner, its predecessor, to give you a better understanding and to help you in choosing your new cordless vacuum cleaner.


- Suction power capacity

BS900 Cordless Vacuum Cleaner has a suction capacity of 25KPA, while the BS800 Cordless Vacuum Cleaner of 23KPA.


- Efficient cleaning time: 

BS900 Cordless Vacuum Cleaner has 3 speed modes: 55 minutes for 7KPA,20 minutes for 13KPA and 8 minutes for a maximum of 25KPA. 

On the other hand, BS800 Cordless Vacuum Cleanerhas only 2 speed modes: 15 minutes at the highest speed and 30 minutes at the lowest speed.


- Charging time: 

BS900 Cordless Vacuum Cleanerrecharges in a maximum time of 2-3 hours, while BS800 Cordless Vacuum Cleaner of 4-5 hours. Definitely more efficient.


                                                 The table exemplifies the improvements between BS900 and BS800

Now we will review features between BS900 Cordless Vacuum Cleaner with its Tineco A11 Master.


- Power-Voltaje: The brushless motor voltage of BS900 Cordless Vacuum Cleaner is 400W, while Tineco A11 Master has 120W, which means a more powerful motor of BS900 Cordless Vacuum Cleaner.


- Runtime: BS900 Cordless Vacuum Cleaner runtime is up to 55 minutes in mode1, while Tineco A11 Master up to 50 minutes. However, in mode 2, BS900 Cordless Vacuum Cleaner up to 20 minutes and 8 minutes at a maximum KPA. 


- Dustbin capacity: The dust recipient capacity in both is 0.6L, which indicates that both are good at collecting dust and debris.


- Charging time: The BS900 Cordless Vacuum Cleaner charging time is about 2-3 hours, while Tineco A11 Master about 4-5 hours.


- Multi-Use: Both can easily be converted to a handheld vacuum cleaner to clean corners, stairs, etc.


- Design style: Another aspect is that the compact BS900 Cordless Vacuum Cleaner container is much more comfortable and easy to empty the dust, as well as to disassemble and wash it. 

As we see, BS900 Cordless Vacuum Cleaner has a pretty good improvement and higher performance over other versions and products of the same type. Therefore, it is undoubtedly a very good investment for your cleaning needs and maintaining a much cleaner home than before. I'm sure that you will be fascinated with  BS900 Cordless Vacuum Cleaner when you get it. 

-If you have any questions or suggestions, you could join our Bagotte-Forum to communicate with others!

-If you are interested in our blog, you can register E-mail on the blog page to get our blog push information at the first time!

  • Author
  • Recent Posts

Isui

at  Bagotte

Isui, a design expert specializing in smart home products. Served as a consultant for many well-known smart home brands. His product research report has been rated as the best evaluation standard.

Latest posts by Isui (see all)

  • Shopify API

Do You Really Understand These Signals? 0

Do You Really Understand These Signals?

Posted on 

Have you ever been embarrassed by all kinds of flashing lights? Besides being blinded by these flashing lights, you still can’t understand what it means. I am your beacon. I know your troubles. So, let me guide you travel the light signals trip.

Flashing red indicator light, 2 beeps

Cause
• Robot’s bumper is stuck
Solution
Tap robot’s bumper several times to dislodge any debris that may be trapped underneath

Flashing red indicator light, 3 beeps

Cause

• Robot’s drop sensors are dirty

• Robot is stuck on the ledge of a staircase and cannot reverse

Solution

• Clean the drop sensors gently with a dry cloth

Place robot in a new location

• Use a physical barrier to block off the problem area

Flashing red indicator light, 4 beeps

Cause

• Robot’s power level is too low

Solution

• Manually charge robot for at least 5 hours

Solid red indicator light, 1 beep

Cause

• Robot’s left / right wheel is stuck

Solution

• Turn off robot and remove any hair or debris from the left / right wheel

Solid red indicator light, 2 beeps

Cause

• Robot’s side brush is stuck

Solution

• Turn off robot and remove any hair or debris debris from the side brush

Solid red indicator light, 3 beeps

Cause

• Robot’s suction fan is stuck.

Solution

• Turn off robot and remove any hair or debris empty the dust collector

• Make sure the suction inlet is not blocked by any hair or debris

Solid red indicator light, 4 beeps

Cause

• Robot’s rolling brush is stuck

Solution

• Turn off robot and remove any hair or debris from the rolling brush

Flashing blue indicator light, while charging in the station, continuous beeps

Cause

• Any robot's internal component is damaged

Solution

• Please contact the seller directly for repair / replacement


-If you have any questions or suggestions, you could join our Bagotte-Forum to communicate with others!

-If you are interested in our blog, you can register E-mail on the blog page to get our blog push information at the first time!

  • Author
  • Recent Posts

Sakurada Fika

at  Bagotte

The youngest household product expert from Japan, has been engaged in the research and development of household cleaning products for 7 years. She has a very unique understanding of the functional design of household products.

Latest posts by Sakurada Fika (see all)

  • Shopify API

What Should You Do if Your Robot Vacuum Cleaner Falls Down Stairs Suddenly? 0

What Should You do if Your Robot Vacuum Cleaner 

                            Falls Down Stairs Suddenly?

Posted on 

The life is always full of the unexpected. When you were eating, the lady in the next seat accidentally knocked off the water glass and spilled water all over you. When you call for help in a camping in the wild, you find that the damn cell phone had no power. When you were busy cooking, you answered a meaningless phone call, and returned to the kitchen, the fish was burnt.But life always has surprising warmth and forever hope. In the face of accident, we should not be afraid of it, but need to solve it. 

So what should you do if your vacuum cleaner falls down stairs accidentally? Cry on the street? Or squat on the floor and pray? No.

As we all know, Bagotte robot vacuum cleaner use spinning brushes and a vacuum to pick up dirt or debris, much like traditional vacuum cleaner. In fact, Bagotte robot vacuum cleaner can use various of sensors to avoid dangers and stay on track with its vacuuming tasks.

But, will Bagotte vacuum cleaner really falls down stairs?

General speaking, our vacuum cleaners are equipped with kinds of cliff sensors(also called infrared sensors), which can prevent them from falling downstairs. These cliff sensors will stop them from the edge of stairs as they approach the dangerous edge. However, if they are left unattended for a long time, troubles will still occur.

First of all, before we discuss the limitations of our Bagotte vacuum cleaner, let us see how the sensor work.

Bagotte vacuum cleaner uses kinds of sensors to navigate and perform vacuuming activities. These sensors are connected to the intelligent system of the device, which maintain the safety of the entire device and prevent them from any terrain and environmental hazards. When the device starts to work, its sensors will transmit the corresponding data to the microprocessor. Then the microprocessor can alter the device’s movement locus and cleaning paths that can protect the device.


Besides, Bagotte vacuum cleaner uses infrared sensors on its front and underside to navigate around the floor and avoid bumping. And also, these infrared sensors can aim downwards and continuously transmit and receive signals to let the vacuum cleaner know that it is approaching the ground.


If Bagotte vacuum cleaner encounters stairs and is located at the edge of the stairs, the cliff sensors will say to the intelligent system, “ Bagotte, my dear son, quickly increase the distance to the ground!”. Once the system is notified of the risk of falling, it will automatically calculate the best safe path for the vacuum cleaner to retreat form the edge. 

In this way, the sensor is safe and reliable under short-term unattended conditions. However, as the cleaning activities of the vacuum cleaner increase, the dust generated by the cleaner will cover the surface of the sensor. At this time, the sensor will not be able to send and receive signals, so the cleaner will not know what kind of ground it is approaching. In this situation, the cliff sensors would fail to notify our vacuum cleaner, and finally, it goes to the death road and says goodbye to you. Thus, we should clean our sensors regularly. As you know, the dirt will influence the scatter function of infrared sensor. If the dust concentration is high, it will cause the sensor to work normally, and it is impossible to judge the danger ahead.

Besides, if you find vacuum cleaner accidentally keeps hitting everything hard or accidentally runs backward even there is no obstacle in the front, It's also caused by the accumulation of dust.

So, what should you do for that? 

Well, I believe when you see here, you already know what to do. 

1-Remove everything on the front bumper and wipe it clean with a dry cloth

2-Wipe the sensors located on the bottom of the robot with a dry cloth

By the way, except the situations mentioned above, cliff sensors also have difficulty on the dark or black carpet.

Why? When the cliff sensor encounters a dark or black carpet, especially on a carpet with a very uneven surface, the infrared signal emitted by the sensor will be scattered by the carpet, which will cause the vacuum cleaner to overestimate the vertical distance between the sensor and the carpet.

Therefore, we recommend you using a even and lighter carpet.

Lastly, go ahead! Everyone! Clean your Bagotte sensors regularly!

What’s more, Brushes are cleaning consumables and need to be replaced regularly. You can click the link to buy them.

Maybe you interested in it.

-If you have any questions or suggestions, you could join our Bagotte-Forum to communicate with others!

-If you are interested in our blog, you can register E-mail on the blog page to get our blog push information at the first time!

  • Author
  • Recent Posts

 Sakurada Fika

at  Bagotte

The youngest household product expert from Japan, has been engaged in the research and development of household cleaning products for 7 years. She has a very unique understanding of the functional design of household products.

Latest posts by Sakurada Fika (see all)

  • Shopify API
  • Tags: How-to

Blog 0

  • GuEva